Saf-T-Flo Aqua Ammonia Injector  

Aqua Ammonia Injector

150 psi. rated

One of the risks operators face when working with or around aqua ammonia is inhalation. The vapor is toxic and irritating to the nose, eyes, throat, and skin.

Even at concentrations below 19%, operators need to use caution and choose their injectors carefully.

To minimize the risk operator’s face, Saf-T-Flo has developed a retractable injector made entirely from stainless steel.

The packing nut and solution tube adaptor are stainless steel. The packing nut contains a 300 series o-ring that seals tightly against the outside diameter of the solution tube.

A stainless steel spring loaded ball check valve is welded to the schedule 80 stainless steel solution tube.

Saf-T-Seal, an elastomeric tip, created to resist tip clogging and premature mixing, is a standard feature.

  • Stainless Steel Ball Valve (Corp. Stop)
  • Stainless Steel Solution Tube Adaptor & Packing Nut
  • 300 Series EPDM O-Ring Gasket
  • Stainless Steel Restraint Hook & Limit Chain (rated 150 psi)
  • Schedule 80 Stainless Steel Solution Tube
  • Stainless Steel Spring Loaded Ball Check Valve
  • Saf-T-Seal Tip (EPDM)

Aqua Ammonia Injection Assembly (EB-145) (PDF)

Material Safety Data Sheet (PDF)