Retractable Injection Quill - 100 psi rated

100 psi. rated

150 psi. rated

250 psi. rated

All PVC Injector

Flanged Injector

Retractable Injection Quill - 100 psi rated

These injectors are for water mains where pressures do not exceed 100 psi.*

With caution, operators can safely remove and insert the PVC or CPVC solution tubes for inspection or replacement purposes, while the main remains in service. No shutdown is required.

A single stainless steel hook and chain locks the solution tube securely to the main connection.

A stainless steel limit chain will stop the solution tube from extending past the main connection during withdrawal.

The solution tube adapter and packing nut thread together, compressing the 300 series o-ring. This forms a tight seal around the outer diameter of the solution tube.

* We do not recommend or warranty PVC or CPVC solution tubes when velocities in the water main exceed 6 fps.

• Standard Brass Corporation Stopp
• Brass Solution Tube Adaptor
• Brass Packing Nut
• 300 Series O-Ring Gasket
• Stainless Steel Restraint Hook
• Stainless Steel Limit Chain
• Solution Tubes available in PVC and CPVC
• Standard Solution Tube length is 6"

 

Model Number	Solution Tube	Corporation Stop	Check Valve
EB-129	3/8"	3/4"	n/a
EB-131	1/2"	1"	n/a