Power Plant Pumps from Peerless Pump

Power Plant Pumps, Peerless PumpPower Plant Pumps

Peerless Pump helps to power the world by manufacturing the world's most reliable and effecient pumps. Peerless power plant pumps are found in circulating, cooling, and fire protection systems in all areas of the energy industry including oil, natural gas, nuclear, coal and renewable sources. Our innovative supply, maintenance and service packages allow our customers to concentrate on their core business while the Peerless experts worry about the supply, operation and maintenance of pumps.

Power Plant Pumps, Peerless Pump

Peerless Pump 8196 Heavy Duty Process Pump

The Peerless Pump PERFORMER™ Series, Model 8196 ANSI standard pumps are manufactured for a wide range of fl ow and head requirements and meet the latest ASME and ANSI B73.1M specifi cations. The Performer Series combines high effi ciency, maximum performance, and extended Mean Time Between Failure (MTBF) for reduced maintenance cost.

The 8196 ANSI-standard pump will handle corrosive, toxic and abrasive process liquids such as acids, bases and solvents. This pump can be found in Chemical, Petro-chemical, Pulp & Paper, Plastic, Refi ning and Pharmaceutical plants. A wide range of alloys, options and sealing systems makes it an ideal choice for almost any application

8196 ANSI-Standard Pump |

Power Plant Pumps, Peerless Pump

Peerless Pump 8175 Series Process Pump

The Peerless Pump 8175 Series process pump is manufactured for a wide range of flow and head requirements. The 8175 Series pumps is engineered to lower your operating costs over time. Designed for endurance, it is possible to replace only the back-pullout assembly without having to remove the coupling and motor. Casings are extra thick, and shafts and bearings are heavy-duty, making the 8175 the ideal pump for the toughest of services. The 8175 Series pump is interchangeable with competitors’ pumps, making it possible to retrofi t existing installations with quality Peerless Pump products. All 8175 Series power ends are backed with Peerless Pump’s three-year warranty.

Series 8175 - Paper Stock/Slurry Pump |

Power Plant Pumps, Peerless Pump

Peerless 8796 Self Priming Pump

The Peerless Pump 8796 Series pumps are manufactured for a wide range of flow and head requirements and meet the latest ASME specifications. Besides costing less than the competition, the 8796 Series pumps are engineered to lower your operating costs. Save on installation, because these pumps will lift corrosive, toxic, or abrasive liquids from a depth of up to 20 feet without the aid of foot valves, check valves, or auxiliary pumps. Save on inventory costs, because the 8796 back-pullout assembly is completely interchangeable with our 8196 ANSI Series. All 8796 Series Power Ends are backed with peerless Pump’s three-year warranty.

The 8796 Series pumps fit a wide range of applications. They will handle acids, chemicals, or volatile liquids. They can pump liquids with large quantities of entrained air or gas, such as condensate systems or industrial waste treatment. The 8796 pump is the best choice for tank car unloading, mine or tunnel de-watering, or for any application where the pump doesn’t have positive NPSH, or has to be located away from or above the liquid source.

8796 Series Self Priming Pumps | 8796 Maintenance Manual |

Power Plant Pumps, Peerless Pump

The Peerless Fire Pumps, Horizontal Split-Case,Vertical Turbine, In-Line and End Suction Pumps

Thousands of Peerless Pump installations (UL, ULC or FM approved) deliver superior fire protection to facilities worldwide. For over eighty years Peerless Pump has been offering complete service, from engineering assistance to in-house fabrication to field start-up. Products are designed from a broad selection of pumps, drives, controls, baseplates and accessories. Pump choices include horizontal, in-line and end suction centrifugal fire pumps as well as vertical turbines.

Peerless Fire Product Line Brochure |

Power Plant Pumps, Peerless Pump

Peerless Pump C Series General Purpose End Suction Pumps

The Peerless Pump C Series Pumps are close coupled with standard C-face JM or JP solid shaft ball bearing motors specifi cally designed for pump applications in accordance with standards developed by the Hydraulic Institute (HI) and the National Electrical Manufacturers Association (NEMA).

Peerless Pump Series C close coupled single suction pumps are designed for applications in medium duty service and provide maximum pump value in heating, air conditioning booster and general circulating service.

End Suction - Series C Pump |

Power Plant Pumps, Peerless Pump

Peerless Pump F Series General Purpose End Suction Pumps

The Peerless Pump F Series Pumps are general purpose, frame mounted, end suction pumps flexibly coupled to drivers and equipped with coupling guards. Each entire unit can be mounted on a steel base. An optional drip pan is available.

Peerless F Series pumps are designed for applications in medium duty service, providing maximum pump value in heating and air conditioning, booster and general circulating service.

End Suction - Series F Pump |

Power Plant Pumps, Peerless Pump

Constant Pressure Pump Controller System

The Peerless HC Plus system uses state-of-the-art technology, with easy to operate controls. From start-up sequencing to shut-down logic, the Peerless system is designed to provide the pump user with complete system control, as well as maximum operating efficiency.

The HC Plus unit is controlled by the most technologically advanced Programmable Logic Controller (PLC) for easy operation and simple confi guration of the input and output parameters demanded by an installation. The PLC includes an Operator Interface Device (OlD), which provides easy access to application specific information.

HC Plus |

Power Plant Pumps, Peerless Pump

Peerless Pump Type A Pump

The Peerless Pump Type A Pump is a cast iron, bronze-fitted, single stage, double suction, horiaontal split case. Engineered and manufactured in the USA using the latest technology for the industrial, process, municipal and HVAC markets. There are 20 pump sizes ranging from ten-inch to twenty four-inch discharge.

Type A pumps can be applied to a variety of pumping jobs handling water and other liquids, even when there is a modest amount of non-abrasive solids in suspension. Typical installations include: Industrial Service, Pharmaceutical Manufacturing, Municipal Water Supply and many other large flow requirements.

Horizontal Split Case - Series A |

Power Plant Pumps, Peerless Pump

Peerless Pump Engineered AE Series Pump

Using the latest technology, Peerless Pump engineered the AE series pump to accommodate a variety of applications. The single stage, double suction, horizontal split case pump comes in forty-two different hydraulic configurations and twenty-five pump sizes. Discharge sizes range from two to ten inches. The AE has a wide selection of hydraulic performance envelopes, multiple mechanical configurations and several material options.

The AE Series pump handles water and other nonabrasive fluids. Applications vary from small, single pump commercial installations to large, mulit-pump municipal water supply systems. The Peerless Pump municipal water supply systems. The Peerless Pump AE Series gives superior performance in agriculture general industry, building trade, power industry, fire protection, municipal and process applications.

Horizontal Split Case - Series AE |

Power Plant Pumps, Peerless Pump

Power Plant Fire Pump System

In packaged Fire Pump Systems, Peerless can design and build engineered systems from a simple pump and driver arrangement on a skid to a fully-enclosed, completely-integrated pump and control center, with a diesel engine , and all the required controllers, fittings and ancillary equipment per NFPA 20.

Peerless Pump designs tough, versatile products to meet your pumping needs. A complete line of Fire Pumps that are listed by U.L. (Underwriters Laboratories) and approved by FM (Factory Mutual). The industry’s most comprehensive product line includes inline, end suction horizontal split case and vertical turbine models.

Power Plant Fire Pump System |

Power Plant Pumps, Peerless Pump

Peerless Fire Pump Packages

In packaged Fire Pump Systems, Peerless can design and build engineered systems from a simple pump and driver arrangement on a skid to a fully-enclosed, completely-integrated pump and control center, with a choice of diesel or electric drivers, and all the required controllers, fittings and ancillary equipment per NFPA 20.

The Peerless UL/FM Fire Pump System is designed to your specifications, Peerless Packaged UL/FM Fire Pumps come with or without enclosures, with one or more pump/driver combinations, and include controls with inlet/outlet piping/ valves and fittings per NFPA 20.

Peerless Fire Pump Packages |

Power Plant Pumps, Peerless Pump

Interchangeable Parts ANSI/Process Pumps

Peerless Pump has been engineering and manufacturing pumps since 1923. Along the way, we’ve delivered thousands of pumps and pioneered new technologies. Our commitment to quality is reflected in our ongoing research and development efforts. Our process pump line, through product enhancements and design changes is now firmly established as a top ANSI pump and parts supplier.This same commitment is reflected by our people, dedicated to the sale and distribution of genuine Peerless replacement parts. Our philosophy is to deliver OEM quality without charging the high prices typical of other OEM suppliers.

Genuine Replacement Parts |

Power Plant Pumps, Peerless Pump

General Purpose End Suction Pumps Type PE
- Fractional HP

The Peerless Series PE - Fractional Horsepower are non-modifi able units equipped with preset impeller trims for non-overloading performance including the motor’s allowable service factor, when the liquid has 1.0 specific gravity, 31 SSU at 80 0F. C-Face Mounted Jet Pump Motors with stainless steel shafts are used with this fractional PE series.

Fractional horsepower PE pumps are suitable for clear non-corrosive liquids such as water or ethylene glycol solutions and must not be used with hydrocarbons. These units provide maximum pump value for heating, air conditioning, booster and general circulating service.

Series PE End Suction Fractional Horsepower |

Power Plant Pumps, Peerless Pump

General Purpose End Suction Pumps Type PE
- Integral HP

Peerless Pump Series PE - Integral Horsepower are the same as Peerless Pump Type C pumps, except the PE pumps are non-modifi able units equipped with preset impeller trims for non-overloading performance. They use the same C-face JM motors specifically designed for pump applications in accordance with standards developed by the Hydraulic Institute and the National Electrical Manufacturers Association.

Peerless Pump Series PE pumps are suitable for clear non-corrosive liquids such as water or ethylene glycol solutions, providing maximum pump value for heating, air conditioning, booster and general circulating service.

Series PE End Suction Integral Horsepower |

More Peerless Power Plant Pump Brochures  
8196 Low Flow Impeller Brochure B-1522 PVF Inline Fire Pump Package
Vertical Turbine Brochure/Poster Poster - 16 x 20
Brochure - Matrix Format System Analysis for Pumping Equipment Selection
Handbook of Pump Engineering Data Peerless Full Product Line Brochure
Why Peerless Brochure Peerless Cut Cost Begin with the End Brochure
Peerless Corporate Capabilities Brochure HVAC and Hydronics Equipment
The Biggest and Best In The World Brochure