A TORNADO® rotary lobe pump fastened onto a mobile base - this is the NETZSCH TORNADO® Mobile. The concept of mounting the equipment onto a car or truck trailer makes it possible to pump large quantities of fluids with solid content, wastewater and slurries at the most unusual of sites. Based on the given application, a TORNADO® rotary lobe pump is selected in the appropriate size and then simply installed onto a trailer. High capacity and low space requirements make the TORNADO® Mobile ideal for use in any disaster situation.
Pump type XLB-8/2
Bi-directional, self-priming rotary lobe pump, with pulsation-free helical lobes made from GG25 cast iron with NBR rubber coating, supported by two bearings. Adjustable housing half-shells and replaceable frontal wear plates.
Powerful Deutz 112 kW / 149 PS 4-cylinder diesel drive, 4-stroke direct injection engine, water cooler, fuel filter, air filter, injection pump, lubricating oil filter, oil pan, oil level dipstick, thermostat, cooling fan. 12 V starter. Soundproof hood ensures quiet operation. Suction filter, exhaust assembly with silencer.
Suction: 3 x DN 159 Perrot V Type; discharge: 3 x DN 159 V Type (Storz A or other types of connections also possible). Discharge ports on side of unit, each fitted with a blind cover; all pipes and flanges hot-dip galvanized.
Completely hot-dip galvanized; made from stable, torsionally rigid structural steel with drive consoles and vibration dampers. Stable, hinged front support wheel; 4 supports with hand crank. Overrun brake with auto-reverse, fitted with with DIN towing eye for truck hitching; tarp and bows. Total weight 3400 kg.
Optimized starting, tachometer with adjustable speed monitor, ignition starter switch, error memory. Presettable shut off time, resettable hours run meter, total hours run meter.
Gear and Coupling
Directly flanged gear reducer, 1:3 ratio reduction, with hand-operated clutch.
High Performance, Reliability, Maintenance in Place
NETZSCH GSS Technology - Gearbox Security System
Provides positive separation between pump head/product seals and pump gear box
Protects bearing and timing gears extending operational life time
Eliminates product ingress into gear box in the unlikely event of product seal failure
Eliminates the risk of gear oil ingress into the pump media
Reduces product seal replacement costs
Our design - your benefit: low life cycle costs
1 Front Cover
Rotors, cover seal and product seals can be accessed for inspection, service or replacement by simply removing the front cover. Disassembly of the inlet and outlet pipework and pump housing is not necessary.
2 Wear Plates
Abrasion and chemically resistant, replaceable wear plates are fitted both sides of the rotors.
Straight sided or helical rotors are selected to suit individual application requirements. Rotors are available as bi-lobe, tri-lobe or four-lobe and wide a range of materials are available.
4 Housing Crescents
Modular construction allows for the crescents to be simply replaced should wear occur. Pump life time can be further extended with the option of replaceable crescent liners.
5 Product Seals
Wide range of product seals and materials are available, which are selected to suit individual application requirements. Seal arrangements include easy access connections for seal quench or flush.
6 Pump Gear Box
The patented gear box design includes NETZSCH GSS-Technology separating the pump head from the gear box which eliminates cross contamination between the pump media and gear box lubricant.
Three frames supporting twelve pump sizes provide standard solutions for flowrates from 1 m?/h to 1,000m?/h up to 6bar
TORNADO® XLB - TORNADO® XB - TORNADO® MB
NETZSCH TORNADO® pumps can be selected and configured to suit individual duty, application and installation requirements. The wide range of wetted materials and product seals available cover the majority of applications in the Environmental & Energy, Chemical & Paper and Oil & Gas process industries.
(Search by Product Type i.e. Level or Brand Name i.e. Pulsafeeder)
Pumps And Related Liquid Handling Equipment
Vissers Sales Corp. is a Canadian distributor and representative for liquid handling equipment related to the Chemical/Industrial market. We specialize in all types of pumps, mixers, valves, process controls, level and flow controls.
Vissers Sales Corp. provides an indepth Directory of Industrial Pumps featuring Centrifugal Pumps, Positive Displacement Pumps, Drum Pumps, Metering Pumps, Tote Pumps from the world's leading manufacturers available at Vissers Sales Corp.. We offer a wide variety of products to meet your unique needs.