Sonic-Pro Hybrid Ultrasonic Flowmeters
User-selectable Doppler or Transit Time operating modes for measurement of both clean and dirty fluids
The meter can be factory configured for easy installation
Custom quality metric algorithms and DSP technology for reliable, high accuracy measurements
To allow for changes in the fluid's particle count, SonicPro monitors the signal gain and employs an
Automatic Gain Control (AGC) algorithm that periodically adjusts the gain, maintaining the optimum power level
Smart external communication with simple, intuitive, Sonic-Pro software
Portable, rugged carrying case for easy transportation between applications
2 year factory warranty
T-Track fitting allows for small pipe diameter capabilities (1/2" - 24")
Pipe size range 1/2" - 100"
Virtually any acoustically conductive fluid, Dirty or Clean
Requires particles to be present in the flow stream to "reflect"? the sound waves. (ie. Air bubbles, sand, etc.)
fluid contains .02%-15% (200-150,000 ppm) of particles.
Transit Time Mode:
Requires relatively "clean" fluid to enable the sound waves to complete a circuit.
0%-10% (0-100,000 ppm) of particles.
+/- 1% of rate in Transit-Time mode greater than 1 ft/sec fluid velocity
+/- 0.01 ft/sec in Transit-Time mode less than 1ft/sec fluid velocity
+/- 2% of rate in Doppler mode greater than 5 ft/sec fluid velocity
+/- 0.10 ft/sec in Doppler mode less than 5 ft/sec velocity
Interface & Data
to standard SD Card supplied with unit. User configurable to time interval, flow rate and total set-point triggers. 500,000 events with included 32MB SD Card.
Optional Computer Connection:
Ethernet, USB, RS-232, RS-485. Permits remote access and control of all functions including real-time display, system configuration, data logging, remote data capture as well as process control functions. Software permits remote internet access through local network setup.
Optional Process Control:
Three independently configurable 10 amp, form C relays. Configure to flow rate for high/low/range rate alarm for to flow total for wither manual trigger batch operations of flow triggered batch operations.
4-20 mA output: Fully configurable
0 – 1000Hz Pulse Output : Fully configurable
NEMA 4X (IP66), Powder Coated aluminum, SS clamps & hardware
Meter size: 11"H x 8-1/2"W x 5"D (279H x 218W x 127D mm)
Shipping dimensions: 21"H x 17"W x 9-1/2"H
Weight: 24 lb. (10.9 Kg.) Includes carry case, Excludes T-Track fixture
S3 Hybrid Flow Meter
|High quality 320 x 240 pixel QVGA backlit LCD display. Five button, fully configurable, tactile switch keypad interface. Security: master & configuration passwords.
S2 Hybrid Flow Meter
|High quality 320 x 240 pixel QVGA backlit LCD display. Two button interface, allows user access to clear accumulated total & swap rate & total display fonts. Communication package required to access configuration menu.
S1 Hybrid Flow Meter
|No local display. Factory configured for one application. Communication package required to access configuration menu and data log.
Tech. Data Sheet (PDF) 85000-116
Instruction Manual (PDF) 80000-430
Quick Start Guide (PDF) 80000-478
T-Track Installation V Mount (PDF) 80000-477
T-Track Installation Z Mount (PDF) 80000-482
Engineering Spec Sheets:
Engineering Spec S1 (PDF)
Engineering Spec S2 (DOC)
Engineering Spec S3 (DOC)
Sonic-Pro Firmware Update Instructions (PDF) 80000-442