 Series EHH 4/10 and 1.0 hp
Single Seal with Secondary Exclusion Seal
Submersible Effluent Pumps Specifications
| Sizes |
2" discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
Open, 2 vane, cast iron with pressure vanes on back side |
| Hardware |
stainless steel |
| Seal |
Mechanical type in oil filled chamber with secondary exclusion seal, carbon ceramic faces, stainless steel hardware and Buna-N elastomer |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models supplied with carrying handle and 20' (6m) of cable. single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW" |
Submersible Effluent Pumps Motor Specifications
| Single Phase |
PSC (Permanent Split Capacitor) completely oil-filled withoverload protection in motor. |
| Three Phase |
Completely oil filled. Protection required in magnetic starter. |
| Motor Speed |
3450 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Thrust Bearings |
Ball, oil lubricated |
| Radial Bearing |
Ball, oil lubricated |
| Electrical Ratings |
4/10 hp - 115V 1hp 11.5A
4/10 hp - 230V 1ph 5.8A
1.0 hp - 230V 1ph 9.3A
4/10 hp - 208V 3.3A, 230V 3.0A, 460V 1.5A & 575V 1.2A
1.0 hp - 208V 5.9A, 230V 5.4A, 460V 2.8A & 575V 2.3A |
|
