 Series 2 SE
4/10 through 1 hp
2" Solids Handling
1750 rpm
Single Seal Secondary Exclusion Seal
Submersible Sewage Pump Specifications
| Size |
2" NPT vertical discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
2 vane open, cast iron with pressure vanes on back side (4/10 - Zytel - Glass filled) |
| Hardware |
Stainless steel |
| Seal |
Mechanical type in oil filled chamber with secondary exclusion seal, ceramic and carbon faces, stainless steel hardware and Buna-N elastomer. |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models equipped with legs, carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW" |
Submersible Sewage Pump Motor Specifications
| Single Phase |
Completely oil filled with overload protection in motor - PSC (permanent split capacitor) |
| Three Phase |
Completely oil filled, overload protection provided in magnetic starter. |
| Motor Speed |
1750 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Thrust Bearings |
Ball, oil lubricated |
| Radial Bearing |
Ball, oil lubricated |
| Electrical Ratings |
115V-1hp: 4/10 hp 10.5A, 1/2 hp 11.5A
230V-1hp: 1/2 hp 5.5A, 1.0 hp 10.5A
208V-3hp: 1/2 hp 3.3A, 1.0 hp 6.0A
230V-3ph: 1/2 hp 3.0A, 1.0 hp 5.5A
460V-3hp: 1/2 hp 1.7A, 1.0 hp 2.7A
575V-3hp: 1/2 hp 1.4A, 1.0 hp 2.2A |
|
