Series 3SE
1.1 through 2.0 hp
2 1.1" Solids Handling
1750 rpm
Single & Double Seal
Submersible Sewage Pump Specifications
Size |
3" NPT vertical discharge |
Pump Body |
Cast iron - Class 30 |
Motor Housing |
Cast iron - Class 30 |
Impeller |
2 vane open, cast iron with pressure vanes on back side. |
Hardware |
Stainless steel |
Seal |
Single Seal Series: Mechanical type with ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Double Seal Series: Mechanical type in tandem, oil filled chamber, carbon & ceramic faces, stainless steel hardware & Buna-N elastomer. |
Square Rings |
Buna-N |
Suitable for |
104ºF (40ºC) liquids |
Standard Equipment |
All models equipped with carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 10/3 type "SOW". Three phase size 14/4 type "SOW" |
Option |
Seal material, additional cable, temperature sensor & seal leak sensor on double seal only. |
Submersible Sewage Pump Motor Specifications
Single Phase |
Completely oil filled with overload protection in motor - PSC (permanent split capacitor) |
Three Phase |
Completely oil filled, overload protection provided in magnetic starter. |
Motor Speed |
1750 rpm |
Insulation |
Class-B |
Shaft |
Stainless Steel |
Bearings |
Ball, oil lubricated |
Electrical Ratings |
230V-1hp:
1.1 hp 10.5A, 1.5 hp 12.6A, 2.0 hp 14.5A
208V-3hp:
1.1 hp 10.5A, 1.5 hp 13.3A, 2.0 hp 15.2A
230V-3hp:
1.1 hp 10.5A, 1.5 hp 11.6A, 2.0 hp 13.2A
460V-3hp:
1.1 hp 10.5A, 1.5 hp 5.8A, , 2.0 hp 6.6A
575V-3hp:
1.1 hp 10.5A, 1.5 hp 4.6A, 2.0 hp 5.2A |
|