Dry Running Hose Pump Ponndorf PD & PD/2 Pumps

  • Dry Running, Hose Pump, Ponndorf, Barnant, Type PD, Type PD2Metering, transfer, and high-pressure filtration

  • Self-priming and low-pulsation models

  • Flow capacities are available up to 5.5 m3/hr (24 GPM) for single hose and up to 9.5 m3/hr (42 GPM) with our unique dual-hose design

  • Pressure up to 4 bar (60 psig)

  • Dry running design provides long tubing life and prevents system contamination should the hose ever rupture

  • Easy hose replacement without disassembly of the pump

  • Flanged tube bed prevents side-to-side movement of the hose

  • Pumps are shipped complete with motor and fixed-speed drive systems ready to install and start

  • Optional drives include mechanical variable speed, variable-frequency, hazardous-area rate, washdown, chemical duty, air-operated, or base shaft pump only

  • Dual hose models available (PD/2)

Specifications:
Housing :
Cast aluminum
Tube Bed :
PTFE
Inlet/Oulet Fittigns :
Polypropylene or 316 SS
Rollers :
Carbon-filled PTFE
Rotor :
Cast aluminum
Shaft :
Stainless steel
Bearings :
Permanently sealed grease filled ball bearings
Hose Material Options :
Natural rubber
Max rpm :
165
Max Temperature (continuous) :
60°C (140°F)
Max Temperature (intermittent) :
80°C (176°F)
Max Pressure :
4 bar (60 psig)
Max Suction Height :
8 m (26 ft)
Max Viscosity :
35,000 cP's (160,000 ssu)

Ponndorf Hose Pumps Type PD & PD 2
Ponndorf Pump Selection Guide
Ponndorf Tubing Guide

 

Site Design - Panther Marketing & Design
Back to Top