pH & Temperature Pen ULTRAPEN PT2 Measure pH & Temperature

Range: 0.00-14.00 pH 0 – 71° C / 32 – 160° F
Accuracy: ± 0.01 pH (After Wet Calibration) ± 0.1 ºC / ± 0.1 ºF
Repeatability: ± 0.01 ± 0.1 ºC / ± 0.1 ºF
Resolution: 0.01 pH 0.1 ºC / 0.1 ºF
Time to Reading Stabilization: 10-30 seconds
Power Consumption: Active Mode 37 mA, Sleep Mode 2 µA
Temperature Compensation: Automatic to 25ºC
Physical Dimensions: 17.15 cm L x 1.59 cm D or 6.75 in. L x .625 in. D
Weight: 54 g/1.9 oz. (without soaker cap and lanyard)
Case Material: Anodized Aircraft Aluminum with Protective Coating
Battery Type: N type, Alkaline, 1.5V
Calibration Solutions: pH 4, pH 7, pH 10
Operating/Storage Temperature: 0 – 55ºC or 32 – 131ºF
Enclosure Ratings: IP67 and NEMA 6
EN61236-1: 2006 – Annex A: 2008: Electrostatic discharge to case of instrument may cause PT2 to spontaneously power on. If this happens, the PT2 will power itself off within seconds.
Category: