Both direct drive and gear driven units are available. The direct drive series (FRH-C) is recommended for moderate shear applications and features 316SS Square pitch propellers as standard. The gear driven series (FRG-C) is recommended for high flow, low shear applications and features 316SS XTF-3 High Efficiency Impellers as standard. Output speeds of 1750 RPM, 400 or 264 RPM depending on your application requirements.

All motors are standard Baldor NEMA C-faced design assuring off-the-shelf replacement. Options include explosion proof, chemical duty or high efficiency.

• 1750 RPM Output Speed for Direct Drive FRH-C models.
• 400 or 264 RPM Output Speed for FRG-C models 
• FRH-C models feature 316SS Square pitch propellers as standard.
• FRG-C models feature 316SS XTF-3 High Efficiency Impellers as standard. 
• FRH-C models recommended for moderate shear, closed tank applications. 

• FRG-C models recommended for high flow, low shear shear, closed tank applications.

• Optional Tri-Clover Sanitary Flange available
  
  

MOTORS

• Standard 115/230/60/1 or 208/230/460/60/3, TEFC. 
• Optional 1150 or 264 RPM motors available. 
• Optional Explosion proof, Chemical Duty, Washdown, or High Efficiency electric motors. Air motors available for 1/4 - 3.0 HP.  
• Optional 50 Hz and Special Voltages available
• Optional Air Lubrication Sets and Needle Valves for Air Motors. 
• Optional AC & DC Variable Speed Drives

FEATURES

• 100% Process Guarantee
• 3 Year Mechanical Warranty
• All Motors are Standard NEMA C-Face Design
• Gears on FRG-C Series rated for a minimum service factor of 1.5
• Standard ANSI 150# or 300# Flanges from 5" and larger.
• Rigid or Removable Shaft Couplings
• Lip Seal, Vapor Seal, Low or High Pressure Stuffing Box Available
• Single or Double Mechanical Seals dry or wet running available
• 10° Angle Riser Mounting Option for Un-baffled Tanks.
• Standard Anti-vibration mounts on all models to increase mixer life
• All 316SS Impellers and Shafts.
• Coatings (PVC, Rubber /Others on Request)
• USDA Approved Sanitary Versions Available
• OSHA Approved for Safety

Model	Net Wt. (lbs.)	Shaft RPM	HP	Standard Shaft (Inches)	Standard XTF-3 Impeller  Dia. (Inches)
					Single	Dual
FRG-1C	94	400	1/4	1 x 48	11	10
FRG-2C	96		1/3		12	11
FRG-3C	101		1/2		13	12
FRG-4C	121		3/4	1-1/4 x 60	14	13
FRG-5C	117		1		15	13
FRG-6C	129		1-1/2		17	15
FRG-7C	136		2	1-/12 x 60	18	16
FRG-8C	146		3		19	17
FRG-15C	125	264	1	1-1/4	19	17
FRG-16C	130		1-1/2		20	19
FRG-17C	158		2		21	20

FRH-C Direct Drive Model Series