APD Series Top Entry Mixer from Cleveland

  • Highly robust cast iron internally reinforced, single piece gear case housing.

  • Output speeds from 350 RPM to 20 RPM

  • C-face motors (Baldor or Reliance) facilitate maintenance

  • Gearing is rated at AGMA Class 13 with a minimum hardness of 58 Rockwell C.

  • Momentary overload a rating of 275%

  • Dedicated mixer drive with oversized bearings, with a quality of ABEC-1. Output bearings are tapered or spherical.

Bearings are rated past 100,000 hours of life.

  • Splash lubrication.

  • Hollow quill design facilitates maintenance and installation.

  • Output shaft oil seals are 1 double lip seal and a 1 single lip seal.

  • Washdown Duty available.

  • Drywell, preventing any leakage of gearbox oil into process media.

  • Regreaseable lower bearings

Category: